Product Specification

SHEET & COILS

 Standard Alloys and Tempers

Alloys

  • AA 1050 AA 1100 AA 1235
  • AA 3003 AA 8011 AA 8079
  • AA 3105

Available Tempers

  • H0 H12 H14 H16 H18
  • H22 H24 H26 H28
  •  

Note :

  1. Maximum Gauge for H18, H28, H38 is 1.60mm.
  2. Maximum Gauge for H16, H26, H36 is 2.54mm.
  3. All alloys available in F Temper above 3.20mm
  4. Other alloys are available on request.

Product Availability

1. Coil

Gauge (mm)

  • 0.30 - 3.20

Width (mm)

  • 914 - 1525

ID (mm)

  • 500

Note :

  1. Available with 50 micron PE coating up to 1220mm.
  2. Available with paper interleaving.

2. Slitted Coil

Gauge (mm)

  • 0.15 - 3.20

Width (mm)

  • 20 - 913

ID (mm)

  • 300;400;500

3. Flat Sheet

Gauge (mm)

  • 0.15 - 0.39
  • 0.40 - 3.20

Width (mm)

  • 600 - 1220
  • 600 - 1525

Length (mm)

  • 500 - 3600
  • 500 - 4000

Note :

  1. Available with 50 micron PE coating up to 1220mm.
  2. Available with paper interleaving.

4. Tread Plate

Gauge (mm)

  • 1.20 - 4.00

Width (mm)

  • 1220

Length (mm)

  • 1800 - 4000

Note :

  1. Only Tempers available “O” or “F”.
  2. Available in 2 and 5 bar patterns.

5. Hot Plate

Gauge (mm)

  • 12 - 100

Width (mm)

  • 900 - 1500

Length (mm)

  • 1800 - 4000

Note :

  1. Only Tempers available “O” or “F”.

6. Circles Blanks

Gauge (mm)

  • 0.35 - 3.60
  • 3.61 - 6.20

Diameter (mm)

  • 110 - 575
  • 110 - 463

7. Embossed


Embossed Sheet

Gauge (mm)

  • 0.15 - 4.00 -> 0.15 - 1.00

Width (mm)

  • 600 - 1250

Length (mm)

  • 500 - 4000


Embossed Coil

Gauge (mm)

  • 0.15 - 4.00 -> 0.15 - 1.00

Width (mm)

  • 600 - 1250

Length (mm)

  • 500 - 4000 -> 500 - 600

Note :

  • Available in orange peel (stucco), fish skin, diamond and parallel lines patterns.

ALUMINIUM FOIL

Gauge -> Alloys (mm)

  • AA 1235
  • AA 1100 AA 1235 AA 8011 AA 8079
  • AA 1050 AA 1100 AA 1235 AA 8011 AA 8079 AA 3003

Available Tempers    

  • H0 H18
  • H0 H18
          
  • H0 H18 H22 H24 H26

Gauge (mm)
     

  • 0.006 - 0.009
  • 0.010 - 0.050
         
  • 0.050 - 0.200

Width (mm)
     

  • 300 - 1270
  • 300 - 1270
         
  • 300 - 1270

ID(mm)
     
     

  • 76;150
  • 76;150
         
  • 76;150

Length -> Surface Finish(mm)

  • Single Bright
  • Single Bright Double Bright
  • Double Bright

ALUMINIUM ROOFING

Product Type
   

  • BINTANG SATRIA
  • LT 7
  • LT 1000
  • TWIN SUPERSPAN
  • ALVARIB 1000
  • SPANDECK 930

Total Width (mm)

  • 800
  • 935
  • 1056
  • 1020
  • 1056
  • 980

Effective Width (mm)

  • 760
  • 890
  • 1000
  • 960
  • 1000
  • 930

Width (mm)
   

  • 0.25
  •  
  •  
  • 0.30 - 1.20
  •  
  •  

Note :

  • Available in orange peel (stucco)