WELCOME TO ALUMINDO.COM |
Introduction
Production Flow Chart
Production Process
Quality Management
Product Ranges
Applications
Product Specifications
Contact Us
Production Flow Chart
Production Process
Quality Management
Product Ranges
Applications
Product Specifications
Contact Us
NEWS & UPDATE |
|||
|
Aluminium Sheet & Coil |
||||||||
| Standard Alloys and Tempers | ||||||||
| Alloys | Available Tempers | |||||||
| AA 1050 AA 1100 AA 1235 AA 3003 AA 8011 AA 8079 AA 3105 |
H0 H12 H14 H16 H18 H22 H24 H26 H28 |
|||||||
| AA 5005 AA 5052 | H0 H32 H34 H36 H38 | |||||||
| Note : 1. Maximum Gauge for H18, H28, H38 is 1.60mm. 2. Maximum Gauge for H16, H26, H36 is 2.54mm. 3. All alloys available in F Temper above 3.20mm 4. Other alloys are available on request. |
||||||||
| Product Availability | ||||||||
| 1. Coil | ||||||||
| Gauge (mm) | Width (mm) | ID (mm) | ||||||
| 0.30 - 3.20 | 914 - 1525 | 500 | ||||||
| Note : 1. Available with 50 micron PE coating up to 1220mm. 2. Available with paper interleaving. |
||||||||
| 2. Slitted Coil | ||||||||
| Gauge (mm) | Width (mm) | ID (mm) | ||||||
| 0.15 - 3.20 | 20 - 913 | 300;400;500 | ||||||
| 3. Flat Sheet | ||||||||
| Gauge (mm) | Width (mm) | Length (mm) | ||||||
| 0.15 - 0.39 | 600 - 1220 | 500 - 3600 | ||||||
| 0.40 - 3.20 | 600 - 1525 | 500 - 4000 | ||||||
| Note : 1. Available with 50 micron PE coating up to 1220mm. 2. Available with paper interleaving. |
||||||||
| 4. Tread Plate | ||||||||
| Gauge (mm) | Width (mm) | Length (mm) | ||||||
| 1.20 - 4.00 | 1220 | 1800 - 4000 | ||||||
| Note : 1. Only Tempers available “O” or “F”. 2. Available in 2 and 5 bar patterns. |
||||||||
| 5. Hot Plate | ||||||||
| Gauge (mm) | Width (mm) | Length (mm) | ||||||
| 12 - 100 | 900 - 1500 | 1800 - 4000 | ||||||
| Note : 1. Only Tempers available “O” or “F”. |
||||||||
| 6. Circles Blanks | ||||||||
| Gauge (mm) | Diameter (mm) | |||||||
| 0.35 - 3.60 | 110 - 575 | |||||||
| 3.61 - 6.20 | 110 - 463 | |||||||
| 7. Embossed | ||||||||
| Embossed Sheet | ||||||||
| Gauge (mm) | Width (mm) | Length (mm) | ||||||
| 0.15 - 4.00 -> 0.15 - 1.00 | 600 - 1250 | 500 - 4000 | ||||||
| Embossed Coil | ||||||||
| Gauge (mm) | Width (mm) | Length (mm) | ||||||
| 0.15 - 4.00 -> 0.15 - 1.00 | 600 - 1250 | 500 - 4000 -> 500 - 600 | ||||||
| Note : Available in orange peel (stucco), fish skin, diamond and parallel lines patterns. |
||||||||
Aluminium Foil |
||||||||
| Gauge -> Alloys (mm) | Available Tempers | Gauge (mm) | Width (mm) | ID (mm) |
Length -> Surface Finish(mm) | |||
| AA 1235 | H0 H18 | 0.006 - 0.009 | 300 - 1270 | 76;150 | Single Bright | |||
| AA 1100 AA 1235 AA 8011 AA 8079 |
H0 H18 | 0.010 - 0.050 | 300 - 1270 | 76;150 | Single Bright Double Bright |
|||
| AA 1050 AA 1100 AA 1235 AA 8011 AA 8079 AA 3003 |
H0 H18 H22 H24 H26 |
0.050 - 0.200 | 300 - 1270 | 76;150 | Double Bright | |||
Aluminium Roofing |
||||||||
| Product Type | Total Width (mm) | Effective Width (mm) | Gauge (mm) | |||||
| BINTANG SATRIA | 800 | 760 | 0.25 | |||||
| LT 7 | 935 | 890 | 0.30 - 1.20 | |||||
| LT 1000 | 1056 | 1000 | ||||||
| TWIN SUPERSPAN | 1020 | 960 | ||||||
| ALVARIB 1000 | 1056 | 1000 | ||||||
| SPANDECK 930 | 980 | 930 | ||||||
| Note : Available in orange peel (stucco) |
||||||||
|
||||||||
Copyright 2006 PT. ALUMINDO LIGHT METAL INDUSTRY Tbk.
Designed & Maintained by micromedia